Micro Resistance Method

Micro-resistance measuring method according to the standard DIN EN 1457

Functional principle

The probe contacts the specimen surface with 4 electrodes. The two outer electrodes supply a current to the coating. The copper coating between the two inner electrodes serves as an electrical resistor at which the voltage drop is measured.

Schematic diagram of the Micro-resistance measuring method.
Schematic diagram of the Micro-resistance measuring method.

This is indirectly proportional to the thickness of the copper coating. The measurement signal is converted to the coating thickness value in the measuring instrument using the probe characteristic, the functional correlation between the probe signal and the coating thickness. The electrical conductivity of the copper coating is affected by the temperature, which may make a temperature compensation necessary.

Your contact to FISCHER


Piedrujas street 11, office 214
Phone: +371 22304752
E-Mail: aleksandrs.karmazins@hes1.lv
Online contact form